Display Stand: Assembly Instructions
Introducing our very first Erstwilder display stands! Created as a useful storage and display solution for your favourite pieces, they are easy-to-assemble and made to sit anywhere in your home so you can show off your treasures loud and proud.
To help with assembly of your display stand, please watch the video above, or read the written instructions below. For any assistance, please reach out to our Customer Support Team here.
Please note that your stand will come flat-packed, with each piece designed to simply slot together (no tools needed).
Included in your box:
1 x headboard with Erstwilder name
2 x side pieces
4 x horizontal levels
3 x horizontal curved panels
1 x front panel with Erstwilder bird logo
2 x vertical column dividers
Assembly Instructions:
1. Unpack and lay out your display stand pieces. Ensure you have the correct number of pieces listed above.
2. Take 1 x horizontal level and slot it into the bottom of the 2 side pieces. Make sure the pieces slide into the grooves and sit flush once clicked into place.
3. Slide the headboard into the top of the 2 side pieces.
4. Take the 4 x horizontal levels and slide them into the side pieces. These will form the base of the stand ‘steps’.
5. Slot the horizontal curved barriers into the remaining grooves of the side pieces. These start to shape the product pockets.
6. Make sure the front panel with the Erstwilder bird logo is placed in the lowest grooves, with the bird logo facing outwards.
7. Using the final vertical dividers, place these in the grooves of the curved barriers. These will create single pockets for your product to sit in. Ensure that the dividers are placed with the widest edge at the top.
Assembly notes:
The pieces and grooves may be stiff at first. If you’re struggling to click the pieces into place, try moving them back and forth to loosen them.
